Product ID:SCOTCH WELD(TM)2216 B/A PT A GRAY EPOX ADHE
MSDS Date:09/21/1989
FSC:8040
NIIN:00-145-0530
Kit Part:Y
MSDS Number: BJQMM

3M

3M CENTER
ST. PAUL, MN 55144-1000
US

Cage: 0F0U5

PACEBROOK LTD

CIRENCESTER GLOS GL7 2AG, MN 55144-1000 UK

Telephone: NONE

Cage: 0F0U5

AMINE TERMINATED POLYMER

Fraction By Weight: 55-70%

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 30-45%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.0-0.1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE:EXTREM IRRIT TO EYES AT DIRECT
CONTACT.DUST FROM GRIND,SAND,CUT OPERATION ON CURED MAT'L MAY CAUSE
IRRIT.SKIN:PROLONGED CONTACT-IRRIT.ALLERGIC REACTION IN CERTAIN
INDIV.INHALE:VAPORS IRRIT TO RSPR TRY SYST.DUST FROM GRIND,SAND,CUT
OPERATIONS ON CURED MAT'L MAY CAUSE RSPRTRY SYST
IRRIT.INGESTION:DIGESTIVE SYST IRRIT.

First Aid:EYE CONTACT: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 10 MINUTES. CALL A PHYSICIAN. SKIN CONTACT: THOROUGHLY
WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION: REMOVE PERSON
TO UNCON TAMINATED AIR. CALL A PHYSICIAN. IF SWALLOWED: DO NOT
INDUCE VOMITING. IMMEDIATELY CALL A PHYSICIAN OR POISON CONTROL
CENTER.

Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.

Spill Release Procedures:VENTILATE THE AREA. OBSERVE THE PRECAUTIONS
FROM OTHER SECTIONS. COLLECT SPILLED MATERIALS. PLACE IN A U.S.
DEPARTMENT OF TRANSPORTATION - APPROVED METAL CONTAINER, AND SEAL.

Handling and Storage Precautions:USE ONLY WITH SUFFICIENT VENTILATION
TO REMOVE VAPORS AND PREVENT VAPOR BUILDUP.AVOID BREATHING VAPORS
RELEASED DURING HEAT CURING.AVOID EYE CONTACT.
Other Precautions:CURING EQUIPMENT SHOULD BE VENTED PROPERLY TO
OUTDOORS OR TO SUITABLE EMISSION CONTROL DEVICE.AVOID SKIN
CONTACT.AVOID EYE CONTACT WITH OR BREATHING DUST FROM CUTTING,
GRINDING OR SANDING OPERATIONS O N CURED PRODUCT.KEEP CONTAINER
CLOSED.

Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR CHEMICAL GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING AS NECESSARY TO PREVENT
SKIN CONTACT. DUST MASK TO AVOID DUST EXPOSURE.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN. THE PRECAUTIONS FOR EACH COMPONENT
SHOULD BE OBSERVED WHEN SEPARATE OR MIXED.

Spec Gravity:1.260 WATER = 1
Viscosity:52.0 CPS
Solubility in Water:NIL
Appearance and Odor:GRAY, PASTE, PUNGENT ODOR.
Percent Volatiles by Volume:0.00

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO, CO2, N AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Waste Disposal Methods:MIX PART A W/PART B.COMPLETELY CURE & DISPOSE OF
FULLY CURED WASTE PRODUCT IN SANITARY LANDFILL.INCINERATE UNCURED
BULK PRODUCT AFTER MIXING W/FLAMMABLE MATERIAL IN INDUSTRIAL OR
COMMERCIAL FACILITY.D ISPOSE IN ACCORDANCE W/ APPLICABLE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.